Home / Products / Legacy Products / VTS-W04
The VTS-W04 switcher is competitively priced Automatic Sequential Switcher designed to meet the needs of the small closed-circuit video system user and which allow two monitors to display the output of up to four cameras in automatic sequence. The scene from each camera is displayed on the monitor for an operator-selected interval of 0.5-30 seconds and may be stopped and a selected scene viewed at the operator's discretion. Unused camera positions may be bypassed without changing the order of sequence or the dwell time. The dwell setting and power switch are incorporated into one control. Red LED lamps indicate the camera position being viewed.
Video Inputs4 BNC connectors
Signal Input Level0.7-2.0 V p-p, 75 Ohm
Video Outputs2 BNC connectors
Signal Output Levels1 V p-p, 75 Ohm
Sequential Interval0.5-30 seconds adjustable
Switching TimeLess than one microsecond
Video GainUnity
Phase LinearityBetter than 3Þ - 10MHz
Frequency Response2Hz-45MHz-0.5dB
Total BandwithLess than 1Hz to beyond 10MHz (-3dB point)
Maximum Tilt1%
Video CrosstalkGreater than 40dB down at 10MHz (Input to Output)
Hum and NoiseGreater than 55dB down (reference 0dB-1 Vrms) Video switching
ElementsTTL intigrated circuits
BandwithLess then 1Hz to beyond 10MHz
Video ConnectorsBNC
Power SwitchRotary control
Switching3-position toggle:bypass, auto and home;snap-action
Dwell Time SwitchingRotary controlled, 0.5 to 30 seconds
ConstructionSteel with black finish
Input Voltage110VAC, 60Hz
Power Consumption5 watts
Weight (per unit)N.W./G.W.:4.96lbs/5.51lbs
Dimensions12.21" x 1.76" x 9.57" (WxHxD)